Ditch Witch Of Minnesota & Iowa

Specifications

• 2024 American Augers Auger Boring Machines 36-600 Tier 4 Final
• Year2024
• ManufacturerAmerican Augers
• Model NameAuger Boring Machines
• Trim Name36-600 Tier 4 Final
• Generic Type (Primary)General
• EngineModel: C4.4 Tier 4f
• Engine ManufacturerCAT
• Engine Power137 HP (102.2 kW)
• Rated Engine Speed2300 RPM
• Engine Torque, Maximum327 ft-lbs. (443 Nm) @ 2200 RPM | 391 ft-lbs. (530 Nm) @ 1400 RPM
• Fuel System
• Fuel TypeDiesel
• Drivetrain
• TransmissionEaton FS-5205A, 5-speed
• ClutchSpring applied with 14. in. (356 mm) diameter single disk / hydraulically-assisted clutch actuator
• GearboxRatio: 54.2:1
• Operational
• Operating ConditionsMaximum Thrust: 600,000 lbs. (272 Tonnes)
• Lights and Safety
• LightingWork Lights: 12 Volt
• DimensionsMaster Pusher Diameter: 36 in. (914 mm) | Master Pusher Working Range: 12 in. – 42 in. (305 – 1,067 mm) Casing Diameter | Master Pusher Hex Drive: 4 in. (102 mm) | Centerline: 29.27 in. (744 mm) | Master Saddle: (1) 36 in. (914 mm) compatible
• BoreHydraulic Thrust Cylinder: 9 in (229 mm)
• StrokeHydraulic Thrust Cylinder: 35 in (889 mm)
• Length12 ft. 6 in. (3.81 m)
• Width5 ft. 7 in. (1.69 m)
• Height6 ft. 8 in. (2.03 m)
• Track LengthMaster: 13 ft. (3.96 m) w/1 in. (25 mm) back plate | Extension: 10 ft. (3 m)
• Track WidthMaster: 6 ft. 3 in. (1.92 m) with backplate | Extension: 5 ft. 3 in. (1.6 m)
• Capacities
• Fuel Capacity22 U.S. Gallons (83.3 L)
• Hydraulic Capacity24 U.S. Gallons (91 L)
• Weights
• WeightBase Unit (Split Weight): 5,100 lbs. (2,313 kg) | Power Pack (Split Weight) Tier 4F: 7,240 lbs. (3,284 kg) | Master Pusher: 1,100 lbs. (499 kg) | Master Track: 3,500 lbs. (1,587 kg) | Lifting Sling: 300 lbs. (136 kg) | Total: 17,240 lbs. (7,820 kg) | Extension Track: 2,800 lbs. (1,270 kg) each | Master Saddle: 250 lbs. (114 kg)
• FeaturesExtension Track: (2) | Quik Split: The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and helps the operator facilitate more accurate and safer machine positioning. | Quik Tran: Quik Tran is the fast return system, made available exclusively from American Augers. It provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Tran’s benefit will be easier machine operation in challenging work climates or conditions. | Spoil Door: With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.