2025 Ditch Witch® Full-Size Skid Steers SK3000
- Year 2025
- Make Ditch Witch®
- Model Full-Size Skid Steers
- Engine Model: 4TNV86CT
2025 Ditch Witch® Full-Size Skid Steers SK3000
2025 Ditch Witch® Full-Size Skid Steers SK3000
UNCAGE THE BEAST.Leave the cage behind and trade it for unrivaled performance with the SK3000 Stand-On Skid Steer—a machine unlike any other. Uncage your productivity and upgrade to the SK3000.
Features may include:
POWER- Powered by a 59-hp (44 kW) Yanmar® turbo-charged diesel engine, the SK3000 is the most powerful stand-on skid steer in its class. 3,100 lbs (1,406 kg) of operating capacity to accommodate larger loads and a higher volume of material. Putting power where it’s needed most, the unit directs up to 51 hp to the attachment for efficient and productive use of hydraulic attachments.
- Operators no longer need to get off the machine to swap non-powered attachments, saving significant time and improving productivity. An advanced hydraulic system with an 8-, 14-, and 22-gpm flow setting offers added attachment versatility, allowing operators to select the right flow for each job. The machine can travel up to 5.8 mph in forward and reverse for increased cycle times.
- A best-in-class 332-in (843-cm) operator platform for superior comfort and stability during long hours on the job. The open, standing operator station provides full 360-degree visibility to all surroundings. An easy-on, easy-off operator platform, with integrated suspension, enhances operator comfort and reduces the risks associated with climbing over an attachment to access the cab.
- Five-inch full-color LCD display provides direct visibility and insight into all engine diagnostics. Four LED work lights on the front and rear of the machine offer increased visibility during night or low-light conditions. DESIGN AND MAINTENANCE
- The construction-grade, durable design is made for heavy-duty jobs, leading to extended machine life and increasing overall ROI. With no daily maintenance and no daily grease zerks, maintenance is simplified, and total cost of ownership reduced.
Engine
Engine Manufacturer
Yanmar®
Engine
Model: 4TNV86CT
Engine Power
Mfg. gross power rating (SAE J1995): 58.9 hp (43.9 kW)
Rated Engine Speed
3,000 rpm
Cylinder Liners
4
Emissions
EPA Stage V
Bore
3.39 in (86 mm)
Stroke
3.54 in (90 mm)
Battery
Battery Capacity, Nominal
SAE reserve capacity rating: 110 min
Battery
SAE cold crank @ 0ºF (-18ºC): 800 amps
Electric
Electrical
System: 12V
Operational
Operating Speed
Ground drive speed Forward/reverse: 5.8 mph (9.3 km/h)
Performance
Noise Level
Operator ear sound pressure: 96 dBA | Sound power: 106 dBA
Hydraulics
Ground Pressure
12.5-in (320 mm) tracks: 5.8 psi (0.39 bar)
Hydraulic Flow
Flow rate (low): 8.0 gpm (30.3 Lpm) / medium: 14.0 gpm (53 Lpm) / high: 22 gpm (83.3 Lpm) | Ground drive, dual hydrostatic pumps flow rate: 22.2 gpm (84 Lpm)
Maximum Pressure
4,000 psi (275 bar) | Ground drive, dual hydrostatic pumps: 5,366 psi (370 bar)
Dimensions
Dimensions
Angle of departure: 27.3° | Maximum tilt angle, fore and aft/side to side: 30°
Ground Clearance
Min (center/side): 10.4 / 8.1 in (264.2 / 205.7 mm)
Width
Machine: 57.5 in (1.46 m) | Bucket, max.: 72 in (1.83 m) / min: 60 in (1.52 m)
Height
Operating, max., 66-in bkt.: 152.6 in (3.88 m) | Hinge pin, max.: 118 in (2.99 m)
Overall Height
Of machine: 64.6 in (1.64 m)
Overall Length
Of machine, 66-in bkt.: 137.6 in (3.49 m) | of loader, no attach.: 106.8 in (2.71 m)
Wheelbase
51.5 in (1.31 m)
Capacities
Features
Tipping capacity: 8,863 lb (4,020 kg) | Rated operating capacity (35% of tipping capacity): 3,102 lb (1,407 kg) | Operating capacity (50% of tipping capacity): 4,432 lb (2,010 kg)
Fuel Capacity
21.1 gal (79.9 L)
Oil capacity
Engine oil, w/ filter: 6.1 qt (5.8 L)
Hydraulic Capacity
Reservoir: 21.1 gal (79.9 L)
Weights
Weight
Machine (no attachment, fluids full): 7,600 lb (3,447 kg)